HANNspree SN22A1 - Manual (Page 43)

BIOS Setup Utility
SN22A1 42
Security menu
The Security menu allows you to set password in order to safeguard your system against
unauthorized use.
The first time you enter this menu, the Supervisor Password and User Password fields will
display “Not Installed”. You may select Change Supervisor Password and Change User
Password to set the passwords.
A brief description of the adjustable menus displays in the Descriptions box below.
Menu Descriptions
Change Supervisor
Password The Supervisor Password controls access to the whole
BIOS setup menu. Sets or changes the password up to
six characters, then press <Enter>. When asked to
confirm the password, type the password again and
press <Enter> to save the changes.
When the Supervisor Password is installed, you may
select the User Access Level option to further define
the security level of users.
Change User Password The User Password controls access to some of the
BIOS setup options. Sets or changes the password up to
six characters, then press <Enter>. When asked to
confirm the password, type the password again and
press <Enter> to save the changes.
Clear User Password Cancels the installed User Password.