Hitachi DVP305U - Manual (Page 29)

1
During playback or pause mode, press the ZOOM button on the remote. A pointer will be displayed on screen.
2
Use the UP/DOWN or LEFT/RIGHT button to select the part of the screen you want to zoom.
3
Press the ENTER button.
- During DVD playback, press ENTER to zoom in 2X/4X/normal.
- During VCD playback, press ENTER to zoom in 2X/normal.
Using the 3D Sound Function
The simulated surround effect (SPATIALIZER N-2-2) depends on the disc contents. If you connect the unit to your stereo
system, you can enhance sound quality and produce a greater surround effect.
This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs.
(Discs which are recorded with LPCM or DTS will not work. When the DIGITAL OUTPUT is set to BITSTREAM in the
Setup Menu, the 3D Sound function will not work.)
1
During playback, press the 3D SOUND button. The 3D SOUND mark will be displayed on screen. (Be sure the DIGITAL
OUTPUT is set to PCM.)
2
Press the UP/DOWN button to turn the 3D Sound feature on or off.
NOTE
- 3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL.
- However, some of these discs do not contain rear channel sound signals.
- Depending on the disc, the Zoom and 3D Sound function may not work.