Harbor Freight Tools 92386 - Manual (Page 11)

SKU 92386 for technical questions, please call 1-800-444-3353. Page 11
WArNINg! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are: lead from lead-based paints, crystalline silica from bricks and ce-
ment and other masonry products, arsenic and chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in well ventilated
areas, and work with approved safety equipment such as those dust masks that
are specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
WArNINg! People with pacemakers should consult their physician(s) before using
this product. Operation of electrical equipment in close proximity to a heart pace-
maker could cause interference or failure of the pacemaker.
WArNINg! The warnings and cautions discussed in this manual cannot cover
all possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
SAVe THeSe INSTrucTIONS
37.
38.
39.
ASSembly INSTrucTIONS
NOTe: For additional information regarding the parts listed in the following pages, refer
to the
Assembly Diagram on page 25.
WArNINg! Always make sure the Power Switch of the Tile Saw is in its “Off”
position and the unit is unplugged from its electrical outlet prior to assembling the
unit, adding any accessories, or making any adjustments to the unit.
Unpack the Tile Saw, and with assistance, carefully lay the tool on its side on a flat,
level floor surface.
(See figure D, next page.)
1.
2.
REV 12/06