HP Q5693A - Manual (Page 14)

6 2 Configuring the MBM for your work environment ENWW
Getting started
After the printer driver is installed, you have to configure the MBM in the printer driver and at the
control panel before you can use it.
Whether the MBM is connected to a printer or MFP, an output bin is set to be the first or only bin
to receive copies (the copy bin) or print jobs. See the following table for more information about
which output bins are designated to received copy and print jobs. For more information, see
“Sending a copy job to an output bin that is different from the default” on page 16 .
When the MBM
is connected to Operational mode Copy bin Default output bin
for copy jobs Default output bin
for print jobs
Printer ● Mailbox mode
● Stacker mode
● Job Separator mode
● Sorter/Collator mode
(The printer does
not produce
copies.) (The printer does not
produce copies.) Standard top bin
MFP Mailbox mode Not applicable (it
is always enabled
in the Mailbox
mode) Face-down bin 1 Face-down bin 2
● Stacker mode
● Job Separator mode
● Sorter/Collator mode
Enabled (default) Face-down bin 1 Face-down bins 2
through 8
● Stacker mode
● Job Separator mode
● Sorter/Collator mode
Disabled Face-down bins 1
through 8 Face-down bins 1
through 8