Harbor Freight Tools CENTRAL PNEUMATIC 94572 - Manual (Page 13)

Page 13 For technical questions, please call 1-800-444-3353. Item 94572
NOTICE
Clean the Spray Gun IMMEDIATELY after use.
Delayed or inadequate cleaning will permanently clog the Spray Gun.
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
User-Maintenance Instructions
procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO pREVENT SERIOUS INJURY:
Detach the air supply and safely discharge any residual air pressure in the tool
before performing any inspection, maintenance, or cleaning procedures.
TO pREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise, vibration, or
leaking air occurs, have the problem corrected before further use.
Inspection
Note: These procedures are in addition to the regular checks and maintenance
explained as part of the regular operation of the air-operated tool.
BEFORE EACH USE, inspect the general condition of the tool. Check for:
• loose screws
• misalignment or binding of moving parts
• clogged nozzle • damaged air supply hose
• cracked or broken parts
• any other condition that may
affect its safe operation