Heat & Glo Fireplace OGL-42-NG User Manual
Page 2
2
4036-903 Rev C
01/04
OGL-42 INSTALLATION INSTRUCTIONS
Safety Precautions
1. Please read these installation instructions completely before beginning installation procedures. Failure to follow them could
cause an appliance malfunction resulting in serious injury and/or property damage.
2. Always check your local building codes prior to installation. The appliance installation must comply with all local, regional, state and
national codes and regulations.
3. NEVER leave children unattended when there is a fire burning in the appliance.
4. This gas appliance is not built for solid fuel. NEVER use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or
similar liquids in this appliance. Keep any flammable liquids a safe distance from the appliance.
5. DO NOT use chimney cleaners or flame colorants in your appliance.
6. While servicing this appliance, always shut off any electricity or gas to the appliance. This will prevent possible electric shock or
burns. Also, make sure the appliance is completely cooled before servicing.
7. To avoid the risk of damaging appliance materials and increasing the risk of spreading a fire, do not use the appliance to cook or
warm food.
WARNING!
This appliance and its components are designed to be installed and operated as a system. Any alteration to or substitution
for items in this system, unless allowed by these installation instructions, will void the Underwriters Laboratories listing
and may void the product warranty. It may also create a hazardous installation. Read through these instructions thoroughly
before starting your installation and follow them carefully throughout your project.
A. LISTINGS AND CODE APPROVALS
This appliance has been tested and listed in accordance with CSA
4-96 U.S. (2nd edition), Outdoor Gas Fireplaces and UL127,
Factory-Built Fireplaces standards, and has been listed by
Underwriters Laboratories Inc. for installation and operation in the
United States and Canada as described in this manual.
Check with your local building code agency prior to installing this
appliance to ensure compliance with local codes, including the
need for permits and follow-up inspections. In the absence of local
codes, comply with the Natural Fuel Gas Code, ANSI Z223.1-
Latest Edition in the United States and CAN/CGA B149
Installation Codes in Canada.
If you need assistance during installation, please contact your local
dealer or the Heat-N-Glo Technical Services Department,
Hearth & Home Technologies Inc. at 1-888-427-3973.
Table of Contents
A. Listings and Code Approvals ......................................................................................................................................... 2
B. Service Parts List ........................................................................................................................................................... 3
C. Installation of the Log Set .............................................................................................................................................. 5
D. Lighting Instructions for the S Series .......................................................................................................................... 8
E. Maintenance Instructions ............................................................................................................................................... 9
F. Troubleshooting - S Series ........................................................................................................................................ 10
Index ............................................................................................................................................................................ 12
L
G
O
s
a
G
l
a
r
u
t
a
N
s
a
G
e
n
a
p
o
r
P
e
r
u
s
s
e
r
P
m
u
m
i
n
i
M
.
c
.
w
.
n
i
0
.
7
.
c
.
w
.
n
i
0
.
1
1
e
r
u
s
s
e
r
P
m
u
m
i
x
a
M
.
c
.
w
.
n
i
0
1
.
c
.
w
.
n
i
0
.
4
1
H
U
T
B
t
u
p
n
I
.
x
a
M
0
0
0
,
1
6
0
0
0
,
2
5
Note:
An arrow (Æ) found in the text and in the index signifies change in content.