Stopping the engine, Safety opera tion maintenance setup – Harbor Freight Tools Pacific Hydrostar 212cc Gasoline Powered Clear Water Pump 69774 User Manual

Page 12

Advertising
background image

Page 12

For technical questions, please call 1-800-520-0882.

ITEM 69774

8.

Break-in Period:
a. Breaking‑in the engine will help to ensure proper equipment and engine operation.
b. The operational break‑in period will last about 3 hours of use. During this period:

•  Do not apply a heavy load to the equipment.
•  Do not operate the engine at its maximum speed.

c. The maintenance break‑in period will last about 20 hours of use. After this period:

•  Change the engine oil. Note: Failure to change the oil regularly may damage the engine and void the warranty.

Under normal operating conditions subsequent maintenance follows the schedule

explained in the MAINTENANCE AND SERVICING section.

Stopping the Engine

1. To stop the engine in an emergency,

turn the Engine Switch off.

2. Under normal conditions, use the following procedure:

a. Slide the Throttle to SLOW (the “turtle”).

b. Turn the Engine Switch off.

b

a

O

I

O

I

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Advertising