HP LTN1565 - Manual (Page 23)

3.4
3
Press the VOL + button.
The TV will begin
memorizing all of the
available channels.
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
¥ The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press VOL+ at any time to
interrupt the memorization
process and return to the
CHANNEL menu.
2
Press the CH▼ button to
select “Auto program”.
C h a n n e l
M o v e S e l e c t E x i t
ANT/CATV ANT
Auto program
Fine tune 00
Add/Erase : Erased
LNA : Off
1
First, select the correct
signal source (ANT, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the MENU button.
Press the CH▼ button
to select “Channel”, then
press the VOL + button.
C h a n n e l
M o v e S e l e c t E x i t
ANT/CATV STD
Auto program
Fine tune 00
Add/Erase : Erased
LNA : Off
Auto program ANT 30
70%
Exit
4
After all the available channels are stored, the Auto program
menu reappears. Press the MENU button to exit the menu.
07-CHAPTER 3_en 2/25/03 9:28 AM Page 4