Humax LAU-32TPVR - Manual (Page 24)

Mode
You can select the picture type you prefer.
1. Press the MENU button.
2. Select Picture using the ̵/̷Gbutton, and press the OK or ൘Gbutton.
3. Select Mode using the ̵/̷Gbutton and press the ൖGor ൘ button to select
a particular mode. If you select User, you can control the value manually.
Standard : Dynamic : Movie : Mild : User
4. On the Standard, Dynamic, Movie, or Mild, the value of the Brightness,
Contrast, Sharpness and Colour is changed automatically. You can also set
these options simply by pressing the PIC MODE (Picture Mode) button.
Note : If you change the value of the Brightness, Contrast, Sharpness
and Colour, the User is selected automatically.
Colour Temperature
You can select the picture colour tone you prefer.
1. Press the MENU button.
2. Select Picture using the ̵/̷Gbutton, and press the OK or ൘ button.
3. Select Colour Temperature using the ̵/̷Gbutton and press the
OK or ൘Gbutton.
4. Select Colour Temp using the ̵/̷Gbutton, and press the ൖGor ൘ button
to select a particular colour tone. If you select User, you can control the
value manually.
Normal : Cool : Warm : User
5. On the Normal, Cool, or Warm, the value of the R/G/B Gain is changed
automatically.
Note : If you change the value of the R/G/B Gain, the User is selected
automatically.
Setting the Picture
23. Setting the Picture