Humax LAU-32TPVR - Manual (Page 38)

Programme Playback
You can watch the recorded programme by selecting a desired
programme in the Menu - Recording - Recorded Programmes
and pressing the OK or PLAY/PAUSE (
) button.
1. Press the MENU button.
2. Select Recording using the ̵/̷ button, and press the OK or ൘ button.
3. Select Recorded Programmes using the ̵/̷ button, and press the
OK or ൘ button to display the recorded programme list.
4. Select a desired programme to playback using the ൖV൘ button, and then
press the OK or PLAY/PAUSE ( ) button to playback the programme.
5. Time bar appears as following and starts playback of the selected programme
instantly.
Time Bar
Time bar displays the current operation status.
1. The playing time of watching point
2. The played amount of programme
3. Watching point
4. The non-played amount of programme
5. The total recorded time of programme
6. Play status (The speed is shown in playing of fast-forward, fast-rewind,
slow-forward, slow-rewind.)
7. Input source mode of the recorded programme (Digital, Analog, AV1/2/3,
S-Video)
8. Channel number
9. Programme name
When the play status is PLAY on Time bar, if you take no action for
about 3 seconds, Time bar will disappear.
6. You can perform trick play functions like VCR functions such as rewind,
forward, slow motion, pause, skip, and replay using the playback control or
the additional buttons on the remote control during playback a programme.
Playback
37. Playback
1 2 3 4 5 6
7 8 9