Hitachi 42HDX61 - Manual (Page 75)

75
SETUP
Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to
input 2.
Use CURSOR PAD ̆ , ̄ , ̇ , ̈ then press the SELECT button to change AUTO LINK setting.
When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is
convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR,
laserdisc, or DVD) and any of the buttons on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit the menu.
Video 2 Auto Link
NOTES: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
2. When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after
three hours.
Video Power Save
Move SEL Return
Set The Inputs
Setup
Move SEL Return
Set The Inputs
Setup
Video Power Save
Video1
Video2
Video3
Video4
Video5 AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Auto Remote Off
Rename List
Video1
Video2
Video3
Video4
Video5 AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Auto Remote Off
Rename List
Auto Link Auto Link
Set Black Side Panel
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Standard mode.
NOTES: 1. To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3
signal with gray side bar.
2. Depending on received signals, some images and Closed Caption displays may be missing when the Black Side
Panel is set to Auto 1 or Auto 2.
NTSC/480i/480p
Aspect: 4:3 standard
1080i (4x3 source)
Aspect: 16:9 standard
1080i (4x3 source with
logo on corner
Aspect: 16:9 standard
Gray Black Gray Gray
Black Black Gray Gray
Black Black Black Gray
4x3
Expanded
4x3
Expanded
4x3
Expanded
Recomended
Aspect
Off On Auto 1 Auto 2
Signal
Setting ON-SCREEN DISPLA
Y