Hitachi 42HDX61 - Manual (Page 78)

78
SETUP
NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.
Upgrades
Move SEL Return
Software Version #: Main VXXXX.XXXX
1394 VXXXX.03
MMC Software Upgrade
Please insert MMC card
before upgrading.
Upgrade Now
Set Stand-By Mode
Upgrades
Set AV Control
CableCARD Info.
Setup
Move SEL Return
Setup
Upgrades
It shows software information and easy upgrade procedure. This function allows the TV software to be
upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will
notify and provide you with a flash card. In order to receive written notification and the flash card, please
complete and return the warranty card.
Insert MMC card, then press the CURSOR PAD ̆ , ̄ to highlight “Upgrade Now”. Press the SELECT button to select and start
upgrading.
This function sets the IEEE1394 in Stand-By Mode to ON or OFF. Certain digital devices have a power save
feature, in which the device automatically powers OFF when not in use (sleep mode). Only by setting the
IEEE1394 function in Stand-By mode to ON, will the TV be able to control a device that is in sleep mode. Set Stand-By Mode
Set Stand-By Mode
Upgrades
Set AV Control
CableCARD Info.
Setup
Move SEL Return
Setup
Set Stand-By Mode
Move SEL Return
If you want to use the IEEE1394
function in the Stand-By, please
set the IEEE1394 Stand-By mode.
IEEE1394 Stand-By
NOTE: By turning ON the IEEE1394 function, your TV set will no longer be set for power saving Stand-By mode. The IEEE1394
Stand-By function must be set to OFF to return your TV set to the power saving Stand-By mode.
This feature controls the motorized stand. It allows the customer to turn the plasma display left or right
using the remote control. This feature is optional for the 55” model.
Exit OSD menu system before controlling the motorized stand.
Use CURSOR PAD
̈
to rotate the TV to the right.
Use CURSOR PAD ̇ to rotate the TV to the left.
Release the CURSOR PAD to stop rotation.
Power Swivel
Locks
Chan. Manager
Aspect
Audio
Video
Move SEL Sel.
Timers
Setup
Power Swivel
Move SEL Set
Power Swivel Unlocked
NOTES: 1. The Power Swivel has a maximum turning radius of 30˚ (left and right).
2. Do not place any objects on the path of the monitor when using the power swivel feature.
3. Before using the power swivel feature, please make sure that the path of the monitor is clear of any fingers, hands
or any other body parts to avoid causing injury.
4. When the Picture-in-Picture (PIP) or Freeze mode is ON, the Power Swivel is disabled.
ON-SCREEN DISPLA
Y