HP N31.5 - Manual (Page 27)

27
You may vary the nature of the information in this part of the display using
the
display mode button. (See Front Panel.)
4 INFRARED RECEIVER AND TRANSMITTER
This part of the display accepts commands from the Nº31.5’s Remote Con-
trol. (See Remote Control.)
When using the Nº31.5 to teach a learning re-
mote special commands, it can also transmit IR signals. (See Using Learning
Remote Controls.) Always keep this window clean and unobstructed.
Display messages The display also shows a variety of messages about the Nº31.5’s status and opera-
tion. Here are some of the messages you’ll see, and what they mean.
■ CLOSING : The Lid is in motion (closing); appears after the
Lid Open/Close button is pressed.
■ FIRST TRACK : The previous button was pressed while the first track
on the CD (or in a program or a random sequence) was playing.
■ INDEX SEARCH : The Nº31.5 is scanning the CD for indices; appears
after index mode is pressed.
■ INSERT DISC : The Lid is open; appears after the Lid has stopped
opening.
■ LAST TRACK : The next button was pressed while the last track on
the CD (or in a program) was playing.
■ NEW PROGRAM : A new program was recorded in the Nº31.5’s
memory; appears after program save is pressed.
■ NO DAMPER : The Lid is closed and the Disc Damper isn’t installed
on the spindle; appears after the Lid has closed.
■ NO PROGRAM : There’s no program in the Nº31.5’s memory; ap-
pears after program review or program clear is pressed.
■ OPENING : The Lid is in motion (opening); appears after the
Lid Open/Close button is pressed.
■ P01 IS 1st : Indicates a track’s place in a program; appears after
program review is pressed.
■ P02 02 IS 2 : Indicates an index’s place in a program; appears after
program review is pressed.
■ PROG CHANGED : Changes to a program were recorded in the
Nº31.5’s memory; appears after program save is pressed.
■ POLARITY PRG : A program including only the polarity invert func-
tion was saved; appears after program save is pressed.
■ PROG DELETED : A previously saved program was erased from the
Nº31.5’s memory; appears after program clear is pressed, followed
by pressing program save .
■ PROG CLEARED : The temporary program was erased, or the previ-
ously saved program was temporarily overridden; appears after
program clear is pressed.
■ PROGRAM END : There are no more selections in the program be-
ing reviewed; appears after program review is pressed.
■ READING : The Nº31.5 is reading track and time information from
the CD; appears after the Lid has closed.