Harbor Freight Tools 91393 - Manual (Page 4)

SKU 91393 PAGE 4
16. Store idle products out of reach of children and other untrained persons.
Products are dangerous in the hands of untrained users.
17. Maintain products with care. Keep products clean. Do not use a damaged
product. Tag damaged products “Do not use” until repaired.
18. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the product’s operation. If damaged, have
the product serviced before using. Many accidents are caused by poorly
maintained products.
SERVICE
20. Product service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
21. When servicing a product, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Air Filtration System. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Always keep the work area free of obstructions, grease, oil, trash, and
other debris. Do not use a power products in areas near flammable chemicals,
dusts, and vapors. Do not use this product in a damp or wet location.
3. If placing this Air Filtration System on a table or shelf, make sure that the
machine is placed securely on a flat, level surface, capable of supporting the
weight of the machine.
4. If attaching the Air Filtration System to a ceiling, make sure the machine is
attached securely to joists capable of supporting the weight of the machine.
5. Make sure the Switch is in the “Off” position before plugging in the power
cord.
6. Keep the Pleated Type Filter (1) and the 3-Pocket Type Filter (2) clean, in place,
and in good working order.
7. Always unplug the Air Filtration System from its electrical outlet before
performing any inspection, maintenance, or cleaning procedures.