HP 240A - Manual (Page 12)

12 1 Using Emulation
To Eject All Jobs in the Printer
Print all the jobs that the printer has received.
Through this procedure, you can interrupt the receiving of data and empty the buffer. The
procedure is explained below.
1. Press the <Online> button when the display
shown to the right appears.
Note
• Press the <Online> button to make the printer
automatically stop receiving data.
2. Press the <Eject/Set> button.
Printing will start.
All the jobs are printed and “Off-line”
appears in the display.
Note
• When a parallel interface or USB interface is being
used, depending on when the <Online> button is
pressed in step 1, data reception may occur in the
middle of a job.
In this situation, data after that is recognized as a new
job, after the <Eject/Set> button is pressed, and
processed like a new job after releasing offline in step
3.
3. Press the <Online> button.
“Ready to print” appears in the display.
Note
• After “Ready to print” appears, data that is being
processed as a new job may not be printed correctly if
[Print Mode] is set to [Auto] in the common menu.
<Online> button
<Eject/Set> button
<Online> button