HP 240A - Manual (Page 15)

2.2 HP-GL Mode Menu Settings 15
2.2 HP-GL Mode Menu Settings
This section explains the items that can be set using HP-GL mode menu and the setting
procedures.
List of HP-GL/2 Setting Items
This section explains the items that can be set using HP-GL mode menu.
Features Menu
Paper Tray
Sets the paper tray that supplies paper.
Candidate values are shown below.
[Auto] (default)
The printer searches for the paper tray that has the paper size set in [Output Size] and paper
is fed from that tray.
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
Important
• When [Tray 1] to [Tray 4] are selected, the [Output Size] item cannot be set because the paper loaded in
these trays become the output sizes.
Note
• When [Auto] is selected and the same size and type of paper is loaded in the same orientation in
multiple trays, the paper tray will be selected according to the tray priority settings and paper priority
settings in the common menu.
• When the same size of paper is loaded in different orientations in multiple trays, the paper loaded in
landscape is given priority.
• When the optional trays are installed, [Tray 3] and [Tray 4] appear in the display.
Output Size
Sets the size of the paper to print on.
Candidate values are shown below.
„ When the [Paper Tray] is set to [Auto].
[A size] [A4] [A5] [B5] [Auto]
„ When the [Paper Tray] is set to [Tray 1] to [Tray 4].
The paper size loaded in the tray that is set appears in the display. [Output Size] cannot be
set.
Note
• If the paper size loaded in the tray is unknown, then [**] appears in the display.