Hilti SID/SIW 14-A/18-A - Manual (Page 12)

Power tool Position I Position II Position III
SID 18
ತA
60 Nm (44 lb/ft) 110 Nm (81 lb/ft) 165 Nm (122 lb/ft)
SIW 18
ತA (u೑೩" square
drive)
75 Nm (55 lb/ft) 120 Nm (89 lb/ft) 175 Nm (129 lb/ft)
SIW 18
ತA (½" square
drive)
90 Nm (66 lb/ft) 135 Nm (100 lb/ft) 200 Nm (148 lb/ft)
Battery B 14/1.6 B 14/3.3 B 18/1.6 B 18/2.6 B 18/3.3
Rated voltage 14.4 V 14.4 V 21.6 V 21.6 V 21.6 V
Battery capac-
ity 1.6 Ah 3.3 Ah 1.6 Ah 2.6 Ah 3.3 Ah
Energy content 23.04 Wh 47.52 Wh 34.56 Wh 56.16 Wh 71.28 Wh
Weight 0.36 kg
(0.79 lb) 0.58 kg
(1.28 lb) 0.48 kg
(1.06 lb) 0.78 kg
(1.72 lb) 0.78 kg
(1.72 lb)
Temperature
monitoring Yes Yes Yes Yes Yes
Type of cell Lithium-ion Lithium-ion Lithium-ion Lithium-ion Lithium-ion
No. of cells 4 8 6 12 12
5. Safety instructions
NOTE
The safety rules in section 5.1 contain all general
safety rules for power tools which, in accordance
with the applicable standards, require to be listed in
the operating instructions. Accordingly, some of the
rules listed may not be relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and instructions. Fail-
ure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. The term “power tool” in the warnings
refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
en
5