HP BD-2000 - Manual (Page 51)

51
S
ettings and F
u
rther
Adjustments
If the BD player is not connected to a •
surround receiver or amplifier.
If the BD player is connected to a
•
surround receiver or amplifier via HDMI
output.
If you are unsure of the surround
•
receiver or the amplifier’s PCM sampling
rate.
96K: • Select this option if the connected
amplifier or receiver is not capable of
handling 192 kHz signals.
192K:
• Select this option if the connected
amplifier or receiver is capable of handling
192 kHz signals.
Note:
Setting an incorrect PCM sampling rate may
result in unpredictable audio playback.