Hitachi DZMV750MA - Manual (Page 176)

English
176
There was no scene
which can be deleted. This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
113, 121
This card cannot be
used.
Please replace card. The card cannot be used in this DVD video camera/recorder: Use
another card.
28
This disc cannot be
used. Please replace
disc. A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
26
This disc is recorded by
the PAL system. Please
replace disc. This DVD video camera/recorder can use only discs recorded on
the NTSC system. A disc recorded on the PAL system cannot be
used on this DVD video camera/recorder.
—
Top scene cannot be
divided. Division is not possible at the start of scene.
115
UNFORMAT DISC The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/
recorder may be necessary (initializing will erase all recorded
contents on disc). If this message appears, try to initialize the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
135
See *2 on page 177. 27
Use AC adapter/
charger. Finalization is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/charger for
finalization.
44, 138
Use AC adapter/
charger.
Turn off power. Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
44
VIDEO scene cannot be
copied to card. No movie can be copied to card.
Select stills and copy them to card.
120
Write protected.
Check card. A card with the erase prevention switch locked is inserted: Unlock
the switch.
28
Write protected.
Check disc. • A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
136
Message Cause & Troubleshooting
Reference
page