Hitachi DZMV750MA - Manual (Page 34)

English
34
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1
While inserting a fine rod into the hole
marked PUSH, pull the battery holder out
forward.
2
Insert the lithium battery with the positive R
terminal facing down.
3
Slide the cover to close it.
Note :
The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with
remote control: Replace the battery.
REMOVING BATTERY FROM REMOTE CONTROL
1
While pushing the battery holder, slide the
battery out.
Warning :
• KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
• IF SWALLOWED, CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT.
• BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
Note :
• Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2032, or Duracell
DL2032. Use of another battery may present a risk of
fire or explosion.
• Dispose of battery safely in accordance with local
laws. Do not dispose of in fire.
• Do not short circuit the battery.
• Do not hold the battery with the metallic tweezers.
• Keep the battery in a dark, cool, dry place.
• The remote control (DZ-RM4W) and lithium battery
(CR2032) are supplied only with the DZ-GX20MA and
DZ-MV780MA.
Battery holder