Connecting to the dvd player, Using the audio/s-video cable – Humax LGB-22DRT User Manual
Page 16
English-16
Using the Audio/S-Video Cable
S-Video carries the video data as two separate signals (brightness and colour),
unlike composite video which carries the entire set of signals in one package.
S-Video does not carry audio. Hence, a separate audio connection is required.
1
Connect the S-Video cable between the S-VIDEO input jack on TV and the
S-Video output jack on your VCR.
2
Connect the audio cable between the AUDIO-L/R (AV2) input jacks on TV
and the audio output jacks on your VCR.
3
Turn on the TV, and then press the TV/AV button to select S-Video.
4
Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on your VCR. (Refer to the VCR owner’s manual)
Connecting to the DVD Player
Chapter 2 >> Connecting Your TV
Using the SCART Cable
1
Connect the SCART cable between the AV1 jack on TV and the SCART jack
on your DVD player.
2
Turn on the TV, and then press the TV/AV button to select AV1.
3
Turn on your DVD player, and then insert a DVD into the DVD player and
press the PLAY button on your DVD player. (Refer to the DVD player
owner’s manual)
Audio cable
VCR
S-Video cable
SCART cable
DVD
COMPONENT