Humax LGB-22DRT - Manual (Page 55)

English-55
This chapter describes the PVR (Personal Video Recorder) function that allows
you to record a programme in the connected hard disk drive.
You can access to the Recording menu only in Digital TV input mode (if the
hard disk drive is connected to the TV correctly).
Note: You can record the digital TV or radio programmes only. The analog
channels and external AV inputs can’t be recorded.
Time Shifted Recording (TSR)
You can perform TSR (Time Shifted Recording) and other functions similar to
VCR functions using the playback control buttons while playing a programme.
The TV automatically saves the programme in the connected hard disk drive
temporarily, so that users can pause, play, fast rewind, fast forward, replay, etc.
even while watching the currently broadcasting TV programme.
Time Bar
If you press the PLAY button while watching TV, the time bar information will be
displayed. Time bar displays the current operation status, the time gap between
the broadcasting point and watching point and the amount of temporarily saved
programme.
1 Operation status
2 Watching point time (hh:mm:ss)
3 The amount of saved programme
4 Watching point
5 Broadcasting (Live) point
6 Current time (hh:mm)
Pause
If you press the PAUSE button on the remote control, the current programme is
paused. If you press the PAUSE button once again, the programme is resumed
from that point.
Note: Pause makes the time gap or delay between the broadcasting (live) point
and watching point. The time gap is equivalent to the period the programme was
paused. Operations like slow motion and fast rewind also make the time gap.
Press the STOP button to go to the live programme.
Chapter 11 >> Recording and Playback