HP HEWLET HP VECTRA VA 6/XXX - Manual (Page 63)

English 53
3 Troubleshooting Your PC
The HP Summary Screen and Setup Program
When you press , the HP Summary Screen, similar to the
following one, will appear:
This screen gives you a summary of the current configuration
settings of your PC.
Using the HP Setup Program
1 Turn on the display and then the PC. If the PC is already turned on,
save your data and exit all programs, then restart the PC. Consult
your operating system documentation for any special instructions
concerning turning off and then restarting your PC.
VA/6xxx - Copyright 1995 Hewlett-Packard - GZ.xx.xx
BIOS Version : GZ.xx.xx PC Serial Number : FR54011111
CPU Date Code : N/A
System RAM : 16 MB COM1 : 3F8H (Serial A)
Bank A : 8 MB (EDO) COM2 : 2F8H (Serial B)
Bank B : None COM3 : None
Bank C : None COM4 : None
Video RAM : 1 MB LPT1 : 378H
System Cache : None LPT2 : None
Video Device :Matrox LPT3 : None
1st IDE Device : HDD 848 MB Flexible Disk A : 1.44 MB
2nd IDE Device : None Flexible Disk B : None
3rd IDE Device : None Display type : Not Available
4th IDE Device : None
ISA PnP : Not Installed PCI Slot #1 : Not Installed
ISA PnP : Not Installed PCI Slot #2 : Not Installed
ISA PnP : Not Installed PCI Slot #3 : Not Installed
PCI Slot #4 : Not Installed
<F1> to continue, <F2> to run Setup, <F10>to power off, <F5> to retain