Hearth and Home Technologies 8000TR-OAK - Manual (Page 29)

Heat & Glo • 8000TR-OAK, 8000TR-OAK-IPI, 8000TRLP-OAKIPI • 2057-900 Rev. P • 11/08 29
Rear Vent - Horizontal Termination
Figure 7.13
Figure 7.14
No Elbow
One 45º Elbow
H
1
= 1-1/2 ft. (457 mm) Maximum
H
1
= 9 in. (229 mm) Maximum
H
1
H
1
This model is tested and approved to use 45º elbows in corner installations.
However, 90º elbows will result in better performance.
Note: LP units cannot be used with a 45º
elbow. A 90º elbow must be used.