Harbor Freight Tools 93762 - Manual (Page 18)

SKU 93762 For technical questions, please call 1-800-444-3353. Page 18
To Use The Quick Vise Adjustment For An Angle Cut:
1. Loosen the Hex Bolt (136), and move the Mitering Vise Plate (138) to the
threaded hole position. Adjust the Mitering Vise Plate to the desired angle as
indicated by the Angle Scale (165). Loosen the Hex Bolt (139), and adjust the
Moveable Vise Plate (141) to parallel the Mitering Vise Plate. Then, re-tighten
the Hex Bolt. (See Figure Q.)
To Adjust The Stock Stop:
1. Loosen the Socket Head Screw (156) that holds the Stock Stop (157) to the
Shaft (158). (See Figure R.)
2. Adjust the Stock Stop (157) to the desired length position. Then, re-tighten the
Socket Head Screw (156). (See Figure R.)
THREADED
HOLE POSITION
MITERING
VISE
PLATE
(138)
HEX BOLT
(136)
ANGLE SCALE
(165)
MOVEABLE
VISE
PLATE
(141)
HEX BOLT
(139)
FIGURE Q
SHAFT (158)
SOCKET HEAD SCREW (156)
STOCK STOP (157)
WORKPIECE
(NOT INCLUDED)
FIGURE R