Harbor Freight Tools 93762 - Manual (Page 2)

SKU 93762 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Item Description
Electrical Requirements 120V / 60 Hz / 1 HP Motor / 1700 RPM (No Load)
Power Cord: 82” Long, 18 AWG x 3C
Power Cord Plug: 3-Prong, Grounded
Power Switch: 2-Position Rocker w/Pull Out Safety Key
Cutting Capacity 4-1/2” Round Stock / 4” x 6” Rectangular Stock
Variable Speed Capacity 80 FPM / 120 FPM / 200 FPM
Throat Depth 4-1/2”
Angle Cutting Capacity 0° ~ 55° (Left) Miter Plate on Horizontal Cutting Bed
Blade Specifications 64” Long x 15/32” W x 0.025” Thick / 0.045” Kerf / 14 Teeth Per Inch
Horizontal Bed Dimensions 11-1/2” L x 7-1/2” W x 23-1/2” Height from Floor
Vertical Bed Dimensions 9-5/8” L x 9-1/2” W x 33-1/2” Height from Floor
V-Belt Type 0-506
Net Weight 132 Pounds