HP 6200YL - Manual (Page 276)

IPv6 Access Control Lists (ACLs)
Testing and Troubleshooting ACLs
In the above case:
■ Matches with ACEs 10 or 20 that originate on VLAN 20 will increment
only the counters for the instances of these two ACEs in the Test-1
VACL assignment on VLAN 20. The same counters in the instances of
ACL Test-1 assigned to VLANs 50 and 70 will not be incremented.
■ Any Telnet requests to 10.10.20.12 that originate on VLANs 50 or 70
will be filtered by instances of Test-1 assigned as RACLs, and will
increment the counters for ACE 10 on both RACL instances of the
Test-1 ACL.
Using the network in figure 8-48, a device at 10.10.20.4 on VLAN 20 attempting
to ping and Telnet to 10.10.20.12 is filtered through the VACL instance of the
“Test-1” ACL on VLAN 20 and results in the following:
ProCurve(config)# ping 10.10.20.2
10.10.20.2 is alive, time = 5 ms
ProCurve(config)# telnet 10.10.20.2
Telnet failed: Connection timed out.
ProCurve(config)#
Figure 8-49. Ping and Telnet from 10.10.20.4 to 10.10.20.2 Filtered by the Assignment
of “Test-1” as an IPv4 VACL on VLAN 20
8-100