Hamilton Watch Khaki GMT 3 TZ - Manual (Page 8)


© HAMILTON 2006 / KHAKI NAVY
Fivebasicrulesformaintainingthe
water-resistanceofyourwatch
1. Have your watch checked regularly.
2. Do not move the crown when you are in water.
3. Rinse off your watch after having been in the sea.
4. Dry your watch whenever it gets wet.
5. Have your watch checked for water-resistance by
an authorized Hamilton agent each time the case
is opened.
Adjustmentoftime«T1»
1. Unscrew the crown (A).
2. Pull out the crown completely to position (p2).
The seconds hand stops.
3. Adjust the time by turning the crown in the
desired direction.
4. Push the crown completely back in and screw
it down again. The seconds hand starts again,
allowing precise synchronization with a time
signal.
Adjustmentofthedate
1. Unscrew the crown (A).
2. Pull out the crown to position (p1).
3. Turn the crown counterclockwise until the desired
date is displayed.
4. Push the crown completely back in and screw it
down again.
Adjustmentoftimezone«T2»onthe
dial(according to model)
1. Unscrew the crown (A).
2. Pull out the crown to position (p1).
3. Turn the crown clockwise until the time «T2» is
facing the arrow.
22
21
20
24
23
4. Push the crown completely back in and screw it
down again.
Adjustmentoftimezone«T2»or«T3»
ontheinteriorbezel(according to model)
1. Unscrew the crown (B).
2. Turn the crown until the interior bezel graduation
that represents the desired time difference is
positioned at 12 o’clock on the dial.
22
21
20
24
23
Ex. +3 hours of time difference:
Read the local time 3.30 and the time «T2» 6.30.
3. Screw the crown down again.