Honeywell CM901 User Manual
Page 13
12
13
FAQ’s & TROUBLESHOOTING
Can I use my CM901 to control my air-conditioning system?
Yes, if your system has been set up correctly you can use your thermostat to control
the cooling. To switch the thermostat between heating and cooling modes press
the or buttons together for 5 seconds in any of the product operating modes
(AUTO, MAN or OFF). The text ‘COOLING’ will be displayed for a moment on the
screen to indicate the cooling operation is now active. The factory default program
for cooling is specified in the table below, but this can be modified in the same way
as the default heating program:
Period
1
2
3
4
5
6
Time
6:30
8:00
12:00
14:00
18:00
22:30
Temperature
24°C
28°C
24°C
28°C
24°C
24°C
If something happens to my heating system how can I check that the thermostat
is working?
Refer to the Troubleshooting Guide on page 15. If you still need assistance after this
call your installer. The thermostat should only be opened or removed by a qualified
professional to prevent possible injury from electric shock and/or damage to the
product.