The built-in heating program, Reviewing the heating program, Modifying the heating program – Honeywell CM901 User Manual
Page 5
4
5
PROGRAMMING THE CM901
The Built-in Heating Program
The built-in heating program has 6 temperature level changes that can be set
between 3.00am and 2.50am - allowing you to maintain the evening temperature
after midnight. Each temperature level can be set between 5°C and 35°C, and
adjusted in 0.5°C increments. The factory default program for heating is as follows:
Reviewing the Heating Program
To review or edit the heating program move the slider switch to the PROG position
then use the
or
buttons to navigate between the 6 individual programming
periods.
Modifying the Heating Program
To change the heating program:
a.
Set the slider switch to the PROG position, entering programming mode. ‘SET
TIME 1’ will be displayed and the time settings for period
1
will be flashing. The
active period is highlighted by a flashing square symbol around the numbers at
the bottom of the screen.
Period
1
2
3
4
5
6
Time
6:30
8:00
12:00
14:00
18:00
22:30
Temperature
21°C
18°C
21°C
18°C
21°C
16°C
DATE
PROG
AUTO
MAN
OFF
1
6
5
4
3
2