Harbor Freight Tools 91852 - Manual (Page 14)

SKU 91852 For technical questions, please call 1-800-444-3353. PAGE 14
9. Unscrew and remove the Hex Head Bolt (1). Then, remove the Spindle Washer
(2) and Flange (3). (See Figure I.)
HEX
HEAD BOLT
(1)
SPINDLE
WASHER
(2)
FLANGE
(3) FIGURE I
11. Wearing heavy duty work gloves to avoid accidental cuts, remove the old Saw
Blade (4). (See Figure J.)
SAW BLADE
(4)
FIGURE J
10. Release pressure on the Safety Lock Grip (42). (See Figure H.)
12. Install the new Saw Blade (4), making sure the teeth of the Saw Blade are point-
ing
downward . (See Figure D.)
13. Reassemble the Flange (3), Spindle Washer (2), and Hex Head Bolt (1) firmly.
(See Figure I.)
14. Swing the Center Cover (56) back in place, making sure the Blade Guard (72)
covers the Saw Blade (4). (See Figure G.)
15. Reinstall the Screw (62), and retighten the Screw (57). (See Figure F.)
16. Make sure the Blade Guard (72) returns to its original position prior to operating
the Miter Saw.
17. CAUTION! Make sure to pull out on the Knob (124). Turn the Knob 90
degrees. Then, insert the Knob into the
shallow slot in its unlocked posi-
tion. NEVER use the Knob in any cutting operation.