Harbor Freight Tools 91852 - Manual (Page 2)

SKU 91852 For technical questions, please call 1-800-444-3353. PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Item Description
Electrical Requirements 120 V / 60 Hz / 1800 Input Watts.
15 AMPs / 4100 RPM Motor.
Two Prong, Polarized, Power Cord Plug.
Power Switch Type: Single Pull Trigger Type.
Laser Input Power: Two “AAA” Batteries.
Laser Switch Type: Push Button Switch Activation.
Saw Blade (Included)
Diameter/Type 12” Diameter.
100-Tooth Carbide Tipped.
5000 RPM Rated Capacity.
Arbor Size 1” Diameter.
Crosscut Capacity 12-3/4” x 4” Vertical @ 90°.
12-3/4” x 1-15/16” Vertical @ 45°.
Blade Tilt Capacity 0° - 45° R & L Miter / 0° - 45° L-Compound.
Positive Stops 0°, 15°, 22.5°, 30°, 45° L – R Miter.
0°, 45° L Bevel.
Turntable Diameter 13-7/8”.
Overall Table Size 22-3/4” L x 6-1/2” W.
Overall Dimensions 34-1/2” L x 22-7/8” W x 26-1/4” H.
Weight 43.9 Pounds.
E105017
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite flammables.
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
WORK AREA
66AJ
REV 06/05 REV 02/06