Horizon Fitness T71 T72 - Manual (Page 11)

11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
A Open HARDWARE BAG .
B Slide the HANDLEBAR ExTENSION
onto the CONSOLE HANDLEBAR.
C Insert BOLTS (E) into HANDLEBAR
ExTENSION and fully tighten.
D Align the lower part of the
HANDLEBAR ExTENSION with the
center of the CONSOLE MAST.
E Insert BOLTS (F) and ARC WASHER
(D) through bottom holes of
HANDLEBAR ExTENSION into
CONSOLE MAST and fully tighten.
F Repeat on other side.
ASSEMBLY STEP -B
(T72 model)
HANDLEBAR
EXTENSION
& BOLT (F)
BOLT (E)
ARC WASHER (D)
CONSOLE MAST
CONSOLE
T72
BOLT (E)
10 mm
Qty: 2
BOLT (F)
115 mm
Qty: 2
angle view
ARC WASHER (D)
Qty: 2
HARDWARE BAG  CONTENTS : T72
BRACKET
SUPPORT BAR
Please note that for STEP C,
the bracket should be on
the outside of the support
bar as shown in the
drawing to the left.