Horizon Fitness T71 T72 - Manual (Page 12)

12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
YOU’RE FINISHED!
POWER SWITCH CIRCUIT BREAKER
A Open HARDWARE BAG .
B Slide SUPPORT BARS onto side
MOUNTING BRACKETS and
line up with top MOUNTING
BRACKETS.
C Insert 2 BOLTS (E) into the
tops and 2 BOLTS (E) into the
bottoms of each SUPPORT BAR.
The BRACKET should be on the
outside of the SUPPORT BAR
as shown in the drawing to the
left.
D Slide SUPPORT BAR BOOTS
down to cover BOLTS (E).
ASSEMBLY STEP 
MOUNTING BRACKET
BOLT (E)
(8 TOTAL)
SUPPORT BAR BOOT
SUPPORT BARS
BRACKET
SUPPORT BAR
STEP C
#0-5
&

NN
2UZ

UPQ
WJFX
HARDWARE BAG  CONTENTS :
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will light up.
ASSEMBLY STEP