Installer system test, System test system status – Honeywell FOCUSPRO TH5320C User Manual
Page 4
Installation Guide
69-2019EFS—02
Installer system test
Setup function
Settings & options (factory default in bold)
M23675
Press
s
/
t
to turn system on/off.
Press NEXT to advance to next test.
Press DONE to terminate system test.
Test number
10
System status
0
To begin, press and hold the
s
and
t
buttons until the display changes
10
Heating system
0
Heat and fan turn off.
1
Stage 1 heat turns on. Fan turns on if Setup Function 1 is set to 1,
5, 9 or 10 OR Setup Function 3 is set to 1.
2
Stage 2 heat turns on.
3
Stage 3 heat turns on.
20
Emergency heating
system
0
Heat and fan turn off
1
Heat and fan turn on
30
Cooling system
0
Compressor and fan turn off
1
Compressor and fan turn on
2
Stage 2 compressor turns on
40
Fan system
0
Fan turns off
1
Fan turns on
9
Stage 1 compressor
cycle rate (CPH)
3
Recommended for most compressors
[Other cycle rate options: 1, 2, 4, 5 or 6 CPH]
10
Second Stage
Compressor
Cycle Rate
3
Compressor Cycle Rate
[Other options: 1, 2, 4, 5, 6 for Special Applications]
A
Auto Discover
12
Manual/Auto
changeover
0
Manual changeover (Heat/Cool/Off)
1
Auto changeover (Heat/Cool/Auto/Off)
2
Auto changeover only (Auto)
14
Temperature
display
0
Fahrenheit
1
Celsius
15
Compressor
protection
5
Five-minute compressor off time
[Other options: 0, 1, 2, 3 or 4-minute off time]
19
Service Indicator
00–199 Diagnostic Codes
See Special function section on page 5.
23
Backlight Mode
0
Disabled
1
Enabled
26
Aux Control
0
Comfort
1
Economy
See Special function section on page 5.
27
Heat temperature
range stops
90 Max. heat temperature setting is 90 °F (32 °C)
[Other options: 40 °F to 89 °F (4.5 °C to 31.5 °C)]
28
Cool temperature
range stops
50 Min. cool temperature setting is 50 °F (10 °C)
[Other options: 51 °F to 99 °F (10.5 °C to 37 °C)]
System test
System status