Henkel K-NP - Manual (Page 2)

Henkel, Inc.
P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171
www.keenovens.com
Model K-NP Holding Ovens
Installation Instructions & Repair Parts List
One Year Limited Warranty
Henkel, Inc. warrants its products against defects in material and workmanship. Henkel,
Inc. will either repair or replace without charge any properly installed product which fails
under normal operating conditions within one year from date of installation, provided it is
returned to our factory, transportation prepaid, and our inspection determined it to be
defective under the terms of this warranty. The warranty covers only equipment
manufactured by Henkel, Inc., and does not extend to transportation, installation, or
replacement charges at the buyers’ facility; nor does it apply to any other equipment of
another manufacturer used in conjunction with Henkel, Inc. equipment. No other
warranty, expressed or implies exists beyond that included in this statement.
Keen Ovens
Model K-NP
SPECIFICATIONS
Capacity Boxes 36" Cut Length Material 8 12" wire spools
Volts 120V
Watts 1000 watts
Thermostat Dial Adjustable
Temperature Range 50ºF-250ºF
Insulation 2" T I W
Interior Dimensions 20"H X 40"W X 20"D
Thermometer Dial
Gas fitting for Nitrogen Purge
Net Weight
300 lbs.
Shipping Weight 370 lbs.
- 2 -