About your new thermostat, System setup, Function settings & options – Honeywell RTH7600 User Manual
Page 19
RTH600
1
69-2206ES—01
About your new thermostat
SETUP
WIRING
ASSIST
ANCE
TROUBLESHOOTING
See page 14 to navigate between functions.
Function
Settings & Options
0180
Heating Fan
Control
Press
s
/
t
to select your heating
system & fan control:
0
Gas or oil heat: Use this
setting if you have a gas or
oil heating system (system
controls fan operation).
1
Electric heat: Use this setting
if you have an electric heating
system (thermostat controls fan
operation).
0190
Heat Pump
Changeover
Valve (for heat
pumps only)
Press
s
/
t
to select whether your
changeover valve is used in heating
or cooling:
0
Cooling changeover valve:
Use this setting if you con-
nected a wire labeled “O” to
the O/B terminal (see page 22).
1
Heating changeover valve:
Use this setting if you con-
nected a wire labeled “B” to the
O/B terminal (see page 23).
System setup