Harbor Freight Tools 93784 User Manual
Page 3
SKU 93784
For technical questions, please call 1-800-444-3353.
Page 3
5.
Do not use the power tool if the Power Switch does not turn it on or off. Any tool
that cannot be controlled with the Power Switch is dangerous and must be
replaced.
6.
Store idle tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
7.
Maintain tools with care. Keep clean. Do not use a damaged tool. Tag damaged
tools “Do not use” until repaired.
8.
Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
9.
Maintain labels and nameplates on this tool. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
10.
Always wear ANSI approved safety impact eye goggles and heavy
work gloves when using this tool. Using personal safety devices reduce
the risk for injury. Safety impact eye goggles and heavy work gloves
are available from Harbor Freight Tools.
Battery acid may cause severe injury to eyes; always wear ANSI
approved safety goggles. Avoid touching eyes while working with or
near a battery. In case of accidental contact, rinse eyes with clean
water for at least 5 minutes and see a doctor immediately.
11. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use this tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a
damp or wet location.
12. People with pacemakers should consult their physician(s) before using this
product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
Caution is necessary when near the coil, spark plug cables, or distributor of a
running engine. The engine should always be off if adjustments are to be made
to the distributor.