Attaching the retma rail covers, Charging the erm batteries – HP R2200 User Manual
Page 34
Advertising
Installation 34
This symbol indicates the presence of electric shock hazards. The area contains no
user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open
this enclosure.
Plug the ERM cable into the socket at the rear of the UPS.
Attaching the RETMA rail covers
NOTE: The HP logo and product name are printed on the RETMA rail covers; therefore, the HP logo badge
is only used for a tower installation/configuration.
Charging the ERM batteries
Connect the UPS to a grounded utility power outlet. When the UPS is plugged in, the unit automatically
enters Standby mode and begins charging the ERM batteries. Allow 24 hours for the ERM to fully charge.
Advertising