Honeywell CT1500 - Manual (Page 17)

17 69-0333—6
Troubleshooting
Your Honeywell thermostat requires little or no attention. Most problems can generally be
traced to the following:
Problem Check Action
No heat. — system switch. May be in OFF or
COOL position.
Move system switch to HEAT position.
— fuse or circuit breaker. If blown or tripped, replace fuse or reset
breaker.
— furnace power switch. May be off. Move switch to ON.
— pilot flame (where applicable).
May be out.
Relight pilot flame per furnace manufacturer
instructions.
— RH and W thermostat
connections.
Turn off power to furnace. Check for correct
terminal hookups. Repair any frayed or
broken wires. Firmly tighten all terminal
screws.
(continued)
1