Hitachi Koki USA DH 24PE - Manual (Page 19)

19
English
ACCESSORIES
WARNING:
Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
(1) Case (Molded plastic) (Code No. 310905) ......................................................................... 1
(2) Side Handle (Code No. 303659) ......................................................................................... 1
(3) Depth Gauge (Code No. 310331) ....................................................................................... 1
1. Drilling anchor holes (Rotation + Striking)
⅜ Drill Bit (Slender shaft)
OPTIONAL ACCESSORIES ........
sold separately
(1) Drill Bit (Slender
Shaft)
(2) Adaptor for slender shaft
(SDS-plus shank)
(1) Drill Bit (Slender Shaft)
(2) Adaptor for
Slender Shaft
Outer diameter Effective Length Overall Length Code No. Code No.
1/8" 1-25/32" 3-35/64"
306369
(3.4mm) (45mm) (90mm)
306370
9/64" 1-25/32" 3-35/64"
306368
(3.5mm) (45mm) (90mm)
⅜ Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank) (2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)