HONDA HS520AS - Manual (Page 35)

STORAGE
33
Engine Oil
1. Change the engine oil (page 24).
2. Remove the spark plug (page 25).
3. Pour a tablespoon (5 ~ 10 cc) of clean
engine oil into the cylinder.
4. Pull the starter rope slowly several
times to distribute the oil.
5. Reinstall the spark plug.
6. Pull the starter grip until resistance is
felt. This will close the valves and pro-
tect the engine from internal corrosion.
Lubrication
Apply a few drops of oil or a small amount of grease to the following
parts for lubrication and rust prevention.
CHUTE TENSION
BOLTS
AUGER CLUTCH LEVER
AUGER SHAFT
BEARINGS



CHUTE HINGE PIN
