HP B6191-90029 - Manual (Page 31)

Chapter 2
Installing and Using Monitors
Checking for Special Requirements
31
Important: HP Storage Works SDLT 160/320 GB Tape Drive and the HP Ultrium 460 External Tape Drive
are not supported by the Online Diagnostics product. Some STM tools may function but these tools are not
supported. The diagnostics tools and utilities that support these devices are HP Storage Works Library and
Tape Tools (L&TT). These tools can be downloaded free of cost from the web site
http://www.hp.com/support/tapetools.
This monitor should be disabled while taking a backup since EMS polling can interfere with the backup
process.
Tape products are monitored on releases prior to HP-UX 11i v2 May 2005 only. However, they are not
monitored in the current release.
Table 2-2 Disk Products
Product
Model/Product
Number
Special
Requirements
All disks bound to the sdisk and disc30
drivers and not under the control of
another event monitor (such as a disk
array monitor).
Hitachi XP128, XP256, XP512 and
XP1024 drives and EMC Symetrix
drives are not supported, since these
drives have their own monitoring.
Supported by: Disk Monitor
NA None
Table 2-3 Tape Products (monitored by SCSI Tape Devices Monitor)
Product
Model/Product
Number
Special
Requirements
DDS-2 Autoloader A3400A None
DDS-3 Autoloader A3716A None
DDS-4 Autoloader C6370A, C6371A March 00 Release
DLT4000 4/48 Library; HP-UX;
Differential SCSI A3544A None
DLT4000 2/48 Library; HP-UX;
Differential SCSI A3545A None
DLT4000 2/28 Library; HP-UX;
Differential SCSI A3546A None
DLT 4000 and 7000; 2/28; Drives
Differential; Robotics SE/Diff A4850A None
DLT 4000 & 7000; 4/48: Drives
Differential; Robotics SE/Diff A4855A None