HP B6191-90029 - Manual (Page 35)

Chapter 2
Installing and Using Monitors
Checking for Special Requirements
35
Table 2-7 Fibre Channel Arbitrated Loop (FC-AL) Hub
Product
Model/Product
Number
Special Requirements
HP Fibre
Channel
Arbitrated Loop
Hubs
Supported by:
Fibre Channel
Arbitrated Loop
Hub Monitor
A3724A
A4839A The FC-AL Hub monitor requires:
Device Firmware revisions:
• Device Agent Firmware revision 2.14 or
greater
• Hub Controller Firmware revision 3.06
or greater
Firmware and installation instructions
are available at
http://www.software.hp.com
C++ runtime support patches:
• 10.20 PHSS_22354 (has a dependency:
PHSS_17225)
• 11.00 PHSS_32574
Before using the hub monitor, edit the
monitor configuration file
(/var/stm/config/tools/monitor/dm_fc_hub.cfg
) to indicate what hubs will be monitored.
See “Fibre Channel Arbitrated Loop Hub
Monitor” on page 128.
Table 2-8 Fibre Channel Switch
Product
Model/Product
Number
Special Requirements
HP Fibre
Channel Switch
Supported by:
Fibre Channel
Switch Monitor
A5223A
A5224A
A5625A
A7347A The FC Switch monitor requires:
C++ runtime support patches:
• 10.20 PHSS_22354 (has a dependency:
PHSS_17225)
• 11.00 PHSS_32574
Before using the switch monitor, edit the
monitor configuration file
(/var/stm/config/tools/monitor/dm_fc_sw.cfg)
to indicate what switches will be monitored.
See “Fibre Channel Arbitrated Loop Hub
Monitor” on page 128.