Harbor Freight Tools 90374 User Manual

Page 15

Advertising
background image

SKU 90374

PAGE 15

To Operate The Drill:

1.

WARNING! Always make sure the Trigger (3F) of the Cordless Drill is in its
“OFF” position, the Battery (1A) is removed from the Drill, and the Battery
Charger (1B) is unplugged from its electrical outlet prior to making any
adjustments to the tool. (See Figure H.)

2.

The Chuck (12F): Accepts up to 3/8” diameter drill bits (not included) and the
Screwdriver Bit (31F). To install a drill bit, hold the Chuck Sleeve firmly in place
and turn the Chuck (12F)

counterclockwise

. Insert the shank of a drill bit all the

way into the Chuck. While holding the Chuck Sleeve in place, turn the Chuck

clockwise

to lock the drill bit in place. (See Figure H.)

3.

The Trigger (3F): The Trigger is operated

manually

simply by squeezing the

Trigger to turn on the Drill and releasing pressure on the Trigger to turn off the
Drill. (See Figure H.)

4.

The Rotation Button (33F): The Rotation Button allows you to change the
rotational direction of the Drill. For a clockwise rotation, move the Rotation
Button to the

right

. For a counterclockwise rotation, move the Rotation

Button to the

left

. (See Figure H.)

5.

The Torque Setting Ring (8F): The Torque Setting Ring allows you to select
up to eight different driving torque settings, depending on the job required. To
change the driving torque, simply turn the Torque Setting Ring to the desired setting.
(See Figure D.)

FIGURE H

TORQUE SETTING RING (8F)

CHUCK SLEEVE

CHUCK (12F)

ROTATION BUTTON (33F)

TRIGGER (3F)

BATTERY (1A)

DRILL HANDLE

Advertising