Heath Zenith SL-6143 - Manual (Page 4)

-4- 595-5649-05
Troubleshooting
Chime does not sound:
• Make sure push button and chime codes are the same (See pages 2 and 3).
• Check orientation of push button battery (See page 3).
• Check push button battery charge, replace if necessary.
Batteries seem OK, but the chime does not work when installed:
• Do not mount chime or push button on metal or near metal studs. This reduces
the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move chime
or push button off metal surface.
• Concrete floors may reduce range. Move chime away from floor.
• Try locating chime closer to push button.
The range of the wireless chime can vary with location, temperature and battery
condition.
Regulatory Information
This device (SL-6166-RX-A or SL-6151-RX-A) complies with Part 15 of the FCC
Rules and RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause un-
desired operation.
The user is cautioned that changes or modifications not expressly approved by the
party responsible for regulatory compliance could void the user’s authority to oper-
ate the equipment.
No Service Parts Available for this Product
Technical Service
(Do Not Send Products)
If you experience a problem, follow this guide. You may also want to visit our Web site
at: www.desatech.com. If the problem persists, call* for assistance at 1-800-858-
8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information available:
Model Number, Date of Purchase, and Place of Purchase.