Document Outline

• Title
• Contents
• 1: Introduction
  • 1.1 What’s New
  • 1.2 Command Syntax
  • 1.3 Command Line Editing
  • 1.4 Help
  • 1.5 About This Manual
• 2: Command Reference
  • 2.1 Backward
  • 2.2 Change 80211
    • 2.2.1 Change 80211 Enabled
    • 2.2.2 Change 80211 Antenna
    • 2.2.3 Change 80211 Channel
    • 2.2.4 Change 80211 ESSID
    • 2.2.5 Change 80211 Fragmentation
    • 2.2.6 Change 80211 MAC Address
    • 2.2.7 Change 80211 Network Mode
    • 2.2.8 Change 80211 Power
    • 2.2.9 Change 80211 Region
    • 2.2.10 Change 80211 Reset
    • 2.2.11 Change 80211 RTS
    • 2.2.12 Change 80211 WEP
  • 2.3 Change Access
  • 2.4 Change Autobaud
  • 2.5 Change Autostart
  • 2.6 Change Backward Switch
  • 2.7 Change Bootgateway
  • 2.8 Change BOOTP
  • 2.9 Change Break
  • 2.10 Change Buffering
  • 2.11 Change Charsize
  • 2.12 Change Datasend
  • 2.13 Change Dedicated
  • 2.14 Change DHCP
  • 2.15 Change Domain
  • 2.16 Change DSRLogout
  • 2.17 Change DTRWait
  • 2.18 Change Flow Control
  • 2.19 Change Forward Switch
  • 2.20 Change Gateway
  • 2.21 Change Inactive Logout
  • 2.22 Change Inactive Timer
  • 2.23 Change Incoming
  • 2.24 Change IPAddress
  • 2.25 Change IPSecurity
  • 2.26 Change LAT CircTimer
  • 2.27 Change LAT Groups
  • 2.28 Change LAT Identification
  • 2.29 Change Loadhost
  • 2.30 Change Local Switch
  • 2.31 Change Loginpass
  • 2.32 Change Modem Control
  • 2.33 Change Modem Emulation
  • 2.34 Change Name
  • 2.35 Change Nameserver
  • 2.36 Change NetWare Encapsulation
  • 2.37 Change NetWare Internal Network
  • 2.38 Change NetWare Loadhost
  • 2.39 Change NetWare Routing
  • 2.40 Change Parity
  • 2.41 Change Passflow
  • 2.42 Change Password Incoming
  • 2.43 Change Password Limit
  • 2.44 Change Password Protect
  • 2.45 Change Portname
  • 2.46 Change Preferred
  • 2.47 Change Privpass
  • 2.48 Change RARP
  • 2.49 Change Retransmit Limit
  • 2.50 Change Rlogin
  • 2.51 Change RS485
  • 2.52 Change Secondary
  • 2.53 Change Session Limit
  • 2.54 Change Signal Check
  • 2.55 Change Silentboot
  • 2.56 Change SNMPSetComm
  • 2.57 Change Software
  • 2.58 Change Speed
  • 2.59 Change Startup
  • 2.60 Change Stopbits
  • 2.61 Change Subnet Mask
  • 2.62 Change TCPKeepalive
  • 2.63 Change Telnetdest
  • 2.64 Change Telnetpad
  • 2.65 Change Termtype
  • 2.66 Change Timeserver
  • 2.67 Change Verify
  • 2.68 Change WINS
  • 2.69 Crypt Password
  • 2.70 Disk
  • 2.71 Delete IPSecurity
  • 2.72 Disconnect
  • 2.73 Finger
  • 2.74 Forward
  • 2.75 Help
  • 2.76 Hostlist
  • 2.77 Initialize
  • 2.78 LAT
  • 2.79 Logout Port
  • 2.80 Netstat
  • 2.81 Ping
  • 2.82 Resume
  • 2.83 Rlogin
  • 2.84 RTC
  • 2.85 Set Privileged
  • 2.86 Show 80211
  • 2.87 Show Hostlist
  • 2.88 Show IPsecurity
  • 2.89 Show NetWare
  • 2.90 Show Nodes
  • 2.91 Show Ports
  • 2.92 Show RS485
  • 2.93 Show Server
  • 2.94 Show Services
  • 2.95 Show Session
  • 2.96 Show SNMP
  • 2.97 Show Users
  • 2.98 Show Version
  • 2.99 Source
  • 2.100 SPX
  • 2.101 Telnet
  • 2.102 Test
  • 2.103 Zero
• A: Contact Information
  • A.1 Problem Report Procedure
  • A.2 Full Contact Information
• B: Environment Strings
  • B.1 Usage
    • B.1.1 Multiple Strings
  • B.2 Available Strings
    • B.2.1 Usage Examples
      • 2.2.1.1 nnnn
      • 2.2.1.2 +C and -C
      • 2.2.1.3 +D and -D
      • 2.2.1.4 +E and -E
      • 2.2.1.5 OR
      • 2.2.1.6 OS
      • 2.2.1.7 +P and -P
      • 2.2.1.8 R
      • 2.2.1.9 T
      • 2.2.1.10 U
      • 2.2.1.11 Y
      • 2.2.1.12 LD=port#
      • 2.2.1.13 LN=node#
• B: Show 802.11 Errors
  • B.1 Introduction
  • B.2 Error Bits
    • B.2.1 Leftmost Number
    • B.2.2 Rightmost Number
• Index