Lantronix MSS - Manual (Page 34)

Command Reference Change Inactive Logout
2-25
Parameters Server
MSS4 only.
Secondary
Configures a gateway to be used when the primary gateway is unavailable.
IPaddress
Specify a host using the numeric IP address format. Specifying an IP address
of 0.0.0.0 removes the previously-defined gateway.
See Also Change Subnet Mask, page 2-47.
2.21 Change Inactive Logout
Determines whether a port will be automatically logged out after a period of inactivity. Any open
connections will be closed before logout. Inactivity is defined as having no keyboard or network activity on
the port. The inactivity period is set with the Change Inactive Timer command.
Restrictions Requires privileged user status.
Parameters Port
MSS4 only. Specifies a particular port or group of ports.
Note: In the absence of the PortList parameter, the configuration will affect the MSS4’s
current port only.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
Defaults Disabled
See Also Change Inactive Timer, page 2-25.
2.22 Change Inactive Timer
Sets the period of time after which a port with Inactive Logout enabled will be considered inactive and
automatically logged out.
Restrictions Requires privileged user status.
CHANGE PORT PortList INACTIVE LOGOUT
DISABLED
ENABLED
 
 
 
CHANGE SERVER INACTIVE TIMER period