Document Outline

• Error Codes
  • Blood Pressure Error Codes
  • Temperature Error Codes
  • SpO2 Error Codes
  • General Error Codes
• Error Codes
  • Blood Pressure Error Codes
  • Temperature Error Codes
  • SpO2 Error Codes
  • General Error Codes
• Error Codes
  • Blood Pressure Error Codes
  • Temperature Error Codes
  • SpO2 Error Codes
  • General Error Codes
• Error Codes
  • Blood Pressure Error Codes
  • Temperature Error Codes
  • SpO2 Error Codes
  • General Error Codes
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
  • Error Codes
    • Blood Pressure Error Codes
    • Temperature Error Codes
    • SpO2 Error Codes
    • General Error Codes
  • Error Codes
    • Blood Pressure Error Codes
    • Temperature Error Codes
    • SpO2 Error Codes
    • General Error Codes
  • Error Codes
    • Blood Pressure Error Codes
    • Temperature Error Codes
    • SpO2 Error Codes
    • General Error Codes
  • Error Codes
    • Blood Pressure Error Codes
    • Temperature Error Codes
    • SpO2 Error Codes
    • General Error Codes
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.
• For detailed operating instructions, refer to the Directions for Use.
  • Spot Vital Signs Quick Reference Card
    • On/Off Button
    • Pressure Preset Button
      • 1. Press and hold for a half second.
      • 2. Press again to scroll through presets. After one blood pressure measurement the Spot Vital Signs returns to the default inflation pressure.
    • Mode Button
      • 1. Press and hold button down for 2 seconds to turn backlight off/on.
      • 2. Remove temperature probe and press once to switch from oral to axillary mode.
      • 3. Press to bring the Spot Vital Signs out of standby/sleep mode.
    • Next Patient/Clear Button
    • Blood Pressure Start/Stop Button
      • 1. Press to start a blood pressure measurement.
      • 2. Press again to cancel the blood pressure measurement.
    • Temperature Operation
      • 1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
      • 2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
      • 3. Place probe in contact with patient tissue as directed in the manual.
      • 4. When done, single beep is heard and the temperature is displayed. Return probe.
    • SpO2 Operation
      • 1. Apply sensor to patient and verify pulse signal bar graph.
      • 2. SpO2 measurement and pulse rate update continuously for 10 minutes.