Welch Allyn Spot Vital Signs Monitor - Quick Reference Guide - Manual (Page 2)

For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
Spot Vital Signs
Quick Reference Card Spot Vital Signs
Quick Reference Card Spot Vital Signs
Quick Reference Card Spot Vital Signs
Quick Reference Card
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
For detailed operating instructions, refer to the Directions for Use.
On/Off Button
Controls power to the Spot Vital Signs.
Pressure Preset Button
1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot
Vital Signs returns to the default inflation pressure.
Mode Button
1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.
Next Patient/Clear Button
Clears all data from the device. Cancels active blood pressure measurement.
Always press the Clear Button before taking vitals on a new patient.
Blood Pressure Start/Stop Button
1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.
Temperature Operation
1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.
SpO
2
Operation
1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO
2
measurement and pulse rate update continuously for 10 minutes.
Spot Vital Signs
Quick Reference Card Spot Vital Signs
Quick Reference Card Spot Vital Signs
Quick Reference Card Spot Vital Signs
Quick Reference Card